 |
Product Description
TECHNICAL FEATURES
•Single sealing ring design,with reverse pressure capability,reduces the load on the sealing end face,extends the service life of the seal,and enables the seal to work in a vacuum environment.
•The wear-resistant design of the shaft adopts a locking embrace to tighten the shaft instead of a set screw.
•The inner side can be equipped with an optional groove to prevent graphite chips from entering the kettle.
•Modular design,with multiple optional components to adapt to more complex working conditions.
ADVANTAGES
•Lubricated and cooled by the product no additional hydraulic installations required.
•Special plastics in product wetted parts provide greater protection against caking and corrosion.
TYPICAL INDUSTRIAL APPLICATIONS
•Flue gas desulfurization (FGD)
•Hydrometallurgy
•Biotechnology
Table Description
PERFORMANCE CAPABILITIES
| Operating pressure | Vacuum 7bar(abs.) | |
| Vessel temperature | -20 ° C ~+ 80 °C | |
| Shaft size | 40 ~ 120mm | |
| Sliding speed | ≤ 5 m/s | |
Product Structure Diagram & The comparison chart of standard material
| NO. | Name | Material |
| 1 | Bearing Seat | 316SS |
| 2 | Bearing | Bearing steel |
| 3 | Gland Insert | 316SS |
| 4 | Clamp Ring | 316SS |
| 5 | Setting Screw | A2-70 |
| 6 | Setting Clips | 304SS |
| 7 | Gland | 316SS/Hast.C/D2205/D2507/904L |
| 8 | Deflector | PTFE/316SS |
| 9 | Stationary Face | Carbon/SIC/TC |
| 10 | Rotary Face | Carbon/SIC/TC |
| 11 | Sleeve | 316SS/Hast.C/D2205/D2507/904L |
| 12 | Pin | 316SS |
| 13 | O-Ring | FKM/EPDM/Aflas/Kalrez |
| 14 | Setting Screw | A2-70 |
| 15 | Bent Pipe | 316SS |
| 16 | Drive Screw | A2-70 |
| 17 | Oil Seal | NBR/FKM |
| 18 | O-Ring | FKM/EPDM/Aflas/Kalrez |
| 19 | O-Ring | FKM/EPDM/Aflas/Kalrez |
| 20 | Spring | Hast.C/316SS |
| 21 | O-Ring | FKM/EPDM/Aflas/Kalrez |
| 22 | O-Ring | FKM/EPDM/Aflas/Kalrez |
| 23 | O-Ring | FKM/EPDM/Aflas/Kalrez |
| 24 | O-Ring | FKM/EPDM/Aflas/Kalrez |
| 25 | O-Ring | FKM/EPDM/Aflas/Kalrez |
| 26 | Oil Injection Assembly | 316SS/Cu |
Downloads
