AOC Automatic Lubrication System for Plan51 of Mechanical Seal

PRODUCT FEATURES

•It is easy to install and operate, and can achieve automatic oil injection.

•The environmentally friendly AOC can be refueled and reused for multiple times, with lower costs.

•Design: The spring is located at the lower end, reducing the oil separation.

•The oiling cycle is determined by the tightness of the knob and the viscosity of the grease.

•Add lubricantion: Re-fill the lubricant through the grease injection port.

APPLICABLE INDUSTRIES

•Process pumps

•Wind power plants

•Steel mills 

•Water treatment plants 

•Petrochemical industry

PRODUCT APPLICATION

The AOC can ensure that your equipment is always in a well-lubricated state. Every minute, every second throughout the 365 days of a year, it can provide 

fresh lubricants for the bearings, gears, racks, chains, sprockets, tracks, and lead screws on your equipment.Can replace API Plan 51.

OPERATION AND USE 

•Remove the oil nozzle and check if there is any blockage.

•For 0# or 1# grease, open at least one circle; for 2# grease, open two circles

•Ensure that the grease is properly injected and make an appropriate fine adjustment

•Suitable for single-point greasing, with a maximum installation distance of no more than 0.5 meters.

SYSTEM PARAMETERS

SYSTEM MATERIALS